Teah Woodward: June 2025

Friday, June 27, 2025

Pretty Blooms - Petal Pink

Pretty Florals + Delightful Wishes

The Pretty Blooms Dies inspired my use of Petal Pink in this card. The Stampin' Up! cardstock and ink matching made creating flowers with depth so very easy! I needed this to be a birthday card, so I pulled the beautiful sentiment from the Delightful Wishes bundle.

You can find the original Instagram post HERE. Enjoy the free tutorial below and make this card yourself.

Pretty Florals + Delightful Wishes

It should be of no surprise to anyone that I love to create floral cards..... and I also have a fondness for layers. But seriously, this card totally was easy. Just a little bit of preplanning prior to die cutting, and BOOM! A lovely card! You will find the list of products used, at the end of this post.

Pretty Blooms + Unbounded Love

Cutting Instructions:

Card base - Basic White Thick: 5 1/2" x 8 1/2", scored at 4 1/4". This is a side fold card.
Card front layer - Petal Pink: 3 3/4" x 5". This layer to be embossed
Flowers - Basic White: 2 1/2" x 6". Die cut 3
Flower detail layer - Petal Pink: 2" x 4 1/2". Apply Adhesive Sheet to the back of the cardstock prior to detail die cutting 3 pcs.
Leaves - Soft Sea Foam: 2 1/2" x 6". Detail die cut 3 pcs
"Wishing" shadow - Basic White: 1 5/8" x 3 3/4" die cut 1 pc
"Wishing" script - Gray Granite: 1 1/2" x 3 3/4". Apply Adhesive Sheet to the back of the cardstock prior to detail die cutting 1 pc.
Sentiment label - Basic White: Die cut 1 pc.
Inner matte layer - Petal Pink: 3 7/8" x 5 1/8"
Inner message liner - Basic White: 3 3/4" x 5"

Assembly Instructions:

Using bone folder, burnish scoreline well.
Using edge of paper snips blade, distress edges of embossed card front layer. Adhere to front of card base using dimensionals.
Using blending brush, apply Petal Pink ink to center of Basic White flowers. Peel adhesiver backer off of flower detail layers and adhere to flowers.
Using mini glue dots, apply leaves to back of each flower. Adhere flowers to card front using dimensionals. I used a single layer of dimensionals on the top and bottom flowers. For the middle flower I stacked dimensionals where necessary for flower to overlap the other flowers.
Peel adhesive backer off of "Wishing" sentiment and adhere to "Wishing" shadow. Adhere to flowers using mini dimensionals.
Using Gray Granite ink, stamp sentiment on label. Adhere sentiment label to focal point.
Scatter rhinestones on card front.
Using Gray Granite ink, stamp flower outlines on inner message liner. Using Petal Pink ink, stamp flower fill. Using Soft Sea Foam, stamp leaves. Using Gray Granite Ink, stamp inner sentiment.
Adhere inner message liner to inner matte layer. Adhere to inner card base.

Thanks for visiting my blog today!

Hugs,

Teah

Product List

Pretty Florals Bundle

[165179]

Delightful Wishes Bundle (English)

[164710]

Unbounded Love Photopolymer Stamp Set (English)

[163378]

Damask Designs Embossing Folder

[165214]

Basic White 8 1/2" X 11" Thick Cardstock

[159229]

Petal Pink 8-1/2" X 11" Cardstock

[146985]

Basic White 8 1/2" X 11" Cardstock

[166780]

Soft Sea Foam 8-1/2" X 11" Cardstock

[146988]

Gray Granite 8-1/2" X 11" Cardstock

[146983]

Petal Pink Classic Stampin' Pad

[147108]

Soft Sea Foam Classic Stampin' Pad

[147102]

Gray Granite Classic Stampin' Pad

[147118]

Rhinestone Basic Jewels

[144220]

Multipurpose Liquid Glue

[110755]

Adhesive Sheets

[152334]

Stampin' Dimensionals

[104430]

Mini Glue Dots

[103683]

Small Blending Brushes

[160518]

[102300]

[103579]

[144107]

[147042]

[152392]

Stampin' Cut & Emboss Machine

[149653]

Add All to Cart

Friday, June 20, 2025

Shepard's Care - Cloud Cover

Shepherd's Care

Every Friday I participate in the Crafty Collaborations Monochromatic Insta Hop on Instagram. This week's color features the new 2025-2027 In Color Cloud Cover. I chose a simple card design with minimal elements, so that the intention of the sentiment would not be lost in a layered design.

This color actually had a chemical reaction to the foam pad used in the Stampin' Up! Classic Stampin' Pad, but there is a work around to avoid that chemical reaction. The Un-inked Stampin' Spots have a felt pad, and the ink does not have any issue with the felt. So I used the Cloud Cover ReInker to ink up one of the un-inked Stampin' Spots. Now I have an ink pad of this great new color.

Shepherd's Care

When I saw which color was going to be featured this week, I had all kinds of ideas.... but I kept being drawn back to this stamp set. So I went with it. I stamped the images and sentiments with Secret Sea, colored in the shepherd's head-dress with Stampin' Blends Light Cloud Cover, and his garment with Stampin' Blends Dark Cloud Cover. I used a Blending Brush to add the color to the perimeter of the card front.

Shepherd's Care

My inside sentiment is not perfectly straight, but I just decided that I am not a perfect person and that my Shepherd loves me anyway..... the sentiment would stay as is.

Cutting instructions:

Card base - Basic White Thick: 5 1/2" x 8 1/2", scored at 4 1/4". This is a side fold card.
Front matte layer - Cloud Cover: 4" x 5 1/4"
Card front layer - Basic White: 3 3/4" x 5"
Inner matte layer - Cloud Cover: 4" x 5 1/4"
Inner message liner - Basic White

Assembly Instructions:

Using Secret Sea ink, stamp sentiment and images on card front layer.
Using Cloud Cover ink and blending brush, blend ink around edges of card front layer, as desired.
Using Cloud Cover Stampin' Blends Combo Pack, color in shepherd's apparel.
Add Rhinestone to center of star.
Adhere card front to front matte layer. Adhere to front of card base using dimensionals.
Using Secret Sea ink, stamp sentiment on inner message liner.
Using Cloud Cover ink and blending brush, blend ink around edges of inner message liner, as desired.
Adhere inner message liner to inner matte layer. Adhere to inner card base.

Thank you for visiting my blog today!

Hugs,

Teah

Product List

Add All to Cart

Friday, June 13, 2025

Sunshine Vibes - Timid Tiger

Sunshine Vibes

The new Sunshine Vibes bundle was the perfect choice for this weeks Crafty Collaborations Monochromatic Insta Hop! Pairing this bundle with Timid Tiger was easy and FUN! Check out the free tutorial below. You will find the product list at the end of this post. Check out the original Instagram post HERE.

Sunshine Vibes Bundle

The detail dies and happy stamps made this card so easy to create! Be sure to add Adhesive Sheet behind your cardstock prior to die cutting, especially for the pieces that have holes or are thin. My first attempt was pretty messy because I used Multipurpose adhesive. I wanted some depth of color in the arches so I used a couple of different applications within the Timid Tiger color range. For the largest, middle and smallest arches, I used Timid Tiger cardstock. Then for the leafy arch I used Stampin' Blends Light Timid Tiger on Basic White cardstock, and for the Squiggle arch I used Stampin' Blends Dark Timid Tiger on Basic White cardstock.

Sunshine Vibes

I am so in love with the stamps in this set! I can't wait to use them all!

Cutting Instructions:

Card base - Basic White Thick: 4 1/4" x 11", scored at 5 1/2". This is a top fold card.
Front matte layer - Timid Tiger: 4" x 5 1/4"
Card front layer - Basic White: 3 7/8" x 5 1/8". This layer is embossed using the Exposed Brick Embossing Folder.
Focal point base - Basic White: 3" x 4": Die cut
Largest, middle, and smallest arches - Timid Tiger: 3" x 4" All 3 can be cut out at once on the same piece of cardstock.
Leafy arch - Basic White: Scraps, die cut 2 to create arch. Color cardstock with Stampin' Blends Light Timid Tiger prior to die cutting.
Squiggle arch - Basic White: Scraps, die cut 1. Color cardstock with Stampin' Blends Dark Timid Tiger prior to die cutting.
Sentiment label - Basic White: Scraps.
Inner matte layer - Timid Tiger: 4" x 5 1/4"
Inner message liner - basic White: 3 7/8" x 5 1/8"
Ribbon: 10"

Assembly Instructions:

Using bone folder, burnish score line of card base.
Adhere embossed card front layer to front matte layer. Adhere to front of card base.
Adhere all arches to focal point base. Using Adhesive sheet on the back of the cardstock prior to die cutting makes adhering very easy. Adhere to card front using dimensionals.
Using Memento Tuxedo Black ink, stamp sentiment. Trim to size. I cut mine apart so that I could adhere the "Sending" above the arches, and the "Good Vibes" at the end of the rainbow. Adhere with dimensionals.
Adhere bow using mini glue dot.
Scatter flat pearls on card front.
Using Timid Tiger ink, stamp image on inner message liner. Adhere to inner matte layer. Adhere to inner card base.

Thank you for visiting my blog today!

Sending you Good Vibes and loads of Hugs,

Teah

Product List